For screen reader problems with this website, please call801-900-14338 0 1 9 0 0 1 4 3 3Standard carrier rates apply to texts.
The P75 is a 2-channel dual source power amplifier with autosource switching. It features two audio line inputs with a loop out to another zone, receiver, or device from Line 2 source. This amplifier can be used for power upgrades in specific zones, for speaker selector or volume control systems.Read More
The P75 is a Class A/B amplifier rated at 75 watts per channel into 4 ohms, and 60 watts into 8 ohms. With the Stereo/Bridge Mono switch in Bridge Mono position, both amplifier channels are combined for a higher powered mono output. In Bridge mode the P75 is rated at 160 watts of power into a single 8 ohm load.
Not available to countries requiring CE certification. 110v only.
Built for multi-speaker applications with volume controls
Automatic switching between two sources with signal sensing
Front panel volume and balance controls
Channels are bridgeable to create one channel with 160 watts of power
General Specs | |
Channels | 2 |
Analog Audio(RCA) Input | 2 |
Color | Black |
General | |
Shipping Dimensions | 10.5" (W) x 4.5" (H) x 20.0" (D), (26.7 x 11.4 x 50.8 cm) |
Shipping Weight | 11.5 lbs (5.2 kg) |
Crosstalk | > 70dB @ 1 kHz |
Frequency Response | 10Hz to 30kHz +0.0dB/- 3.0dB @ 8 ohms, 1 W |
Input Sensitivity | 900mV for 50W at 8 ohms |
Power Output | 60W per channel at 8 ohms |
Power Requirement(s) | 120VAC 60Hz 4.2A |
Signal to Noise Ratio | 100dB A-weighted |