Multi-Room Accessories

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

The Acoustic Landscape™ AS4SAT Speaker Expansion Pack extends the dispersion of the AS41SYS by an additional 500 sq. ft. with two additional 4.5" satellite speakers featuring polypropylene cones, a separate PEI tweeter, and 11 5/8" mounting spikes. Height

Origin Acoustics® Acoustic Landscape™ 4.5" Satellite Speaker Kit

Extends the dispersion of the AS41SYS by an additional 500 sq. ft.

Polypropylene cones, a separate PEI tweeter, and 11 5/8" mounting spikes

Up to two expansion packs can be used in a system for a total of eight speakers and a subwoofer, delivering superior and even coverage in outdoor areas up to 2,500 SqFt in size.

In comparison to other outdoor speakers, Acoustic Landscape™ satellites direct sound inwards towards the listening area, creating a paradise of sound that the neighbors won't even notice.

Simple Installation with Seamless Integration

The Acoustic Landscape™ system can be setup and running in a matter of minutes with just a standard receiver or amplifier with two available channels and some four conductor wire. Once installed, it preserves the natural beauty of it's surroundings while delivering a rich and even sonic performance.

The Acoustic Landscape™ AS4SAT Speaker Expansion Pack extends the dispersion of the AS41SYS by an additional 500 sq. ft. with two additional 4.5" satellite speakers featuring polypropylene cones, a separate PEI tweeter, and 11 5/8" mounting spikes. Height with In-Ground Stake: 18” (457mm).

The Atlona AT-HD420 converts HDMI to a VGA or component output plus stereo audio. It enables an HDMI source to connect to a PC monitor, Projector or TV. Its high bandwidth capability supports a wide range of PC monitor and HDTV resolutions up to 1920 X 12

Atlona® HDMI to VGA/Component and Stereo Audio Format Converter

The Atlona AT-HD420 converts HDMI to a VGA or component output plus stereo audio. It enables an HDMI source to connect to a PC monitor, Projector or TV. Its high bandwidth capability supports a wide range of PC monitor and HDTV resolutions up to 1920 X 1200 or 1080p. The converter is also capable of de-embedding audio from the HDMI source and converting it to a stereo 1/8-inch interface. This will allow the user to connect it to a set of speakers, an AVR or any other audio device.

Supports HDMI input and VGA or component output.

Allows user to select between VGA or component video output interface.

Supports VGA VESA resolutions up to 1920×1200 or component video up to 1080p.

Embedded EDID will simplify the installation procedure. The HD420 will sync up with the source and let the source know to start outputting RGB or YPrPb format depending on the output selection and switch audio to stereo or PCM.

DVI Compatible. You can use the HD420 for down converting DVI to VGA or DVI to component video.

The Atlona AT-HD420 converts HDMI to a VGA or component output plus stereo audio. It enables an HDMI source to connect to a PC monitor, Projector or TV. Its high bandwidth capability supports a wide range of PC monitor and HDTV resolutions up to 1920 X 1200 or 1080p.

Inputs

Outputs

Resolutions

Power Supply

Dimensions

Weight

Operating Temperature Range

The AT-HDVS-150-RX is part of the Atlona HDVS Series of HDBaseT extenders with AV switching and scaling, plus automatic display control and automatic input selection. See below for a complete listing of transmitters and receivers.

Atlona® HDBaseT Scaler

The AT-HDVS-150-RX is compatible with the AT-HDVS-150-TX switching transmitters, available in standard and wall plate models.

The Atlona AT-HDVS-150-RX is an HDBaseT receiver and HD scaler for video signals up to 1080p, plus embedded audio over distances up to 230 feet (70 meters). The HDVS-150-RX is designed for use with the HDVS-150-TX switching transmitters, and together serve as a compact, automated AV system with the convenience of automatic input selection, display control, and HD scaling. The HDVS-150-RX remotely powers the HDVS-150-TX through Power over Ethernet (PoE).

The HDVS-150-RX offers advanced scaling capabilities including image adjustment capability, and a feature for automatically matching incoming signals to the display’s native resolution. Integrated scaling and video processing help optimize image quality and switching performance. This receiver also features audio de-embedding and third-party RS-232 control of the scaler, switcher, and display.

The HDVS-150-RX combines the benefits of HD scaling and integrated display control, and the advantages of HDBaseT signal extension. It incorporates many popular integration convenience features while delivering excellent value for classrooms, huddle rooms, and meeting spaces. The HDVS-150-RX can be surface-mounted for easy installation behind a display or above a projector.

When used in conjunction with an HDVS-150-TX transmitter, the HDVS-150-RX can provide control to a display through RS-232, without the need for a separate control system. This simplifies system design and integration while reducing costs. With automatic display control, the HDVS-150-RX can trigger a display to power on automatically whenever a laptop or other device is connected to the HDVS-150-TX. At the end of the presentation, when the presenter disconnects the laptop, the HDVS-150-RX forces the display to power off. Ease of presenter interaction with the system, and the savings incurred by automatic display shutdown provide a significant return on investment. The HDVS-150-RX display control capability can also be triggered by an external control system.

The HDVS-150-RX is ideal for use in complete system applications with HDVS-150-TX transmitters to provide a two or three-input AV system supporting HDMI and VGA signals, auto-switching, display control, and scaling plus 230 foot (70 meter) extension to displays.

Provides two channel, analog audio signal on balanced captive screw connectors

Improves AV system audio with the use of an external amplifier such as the Atlona AT-PA100-G2

Receives HDMI and VGA/Audio signals up to 230 ft (70m) @ 1080p over CAT6a/7 and 197 feet (60 m) @ 1080p over CAT5e/6

Uses easy-to-integrate category cable for low-cost, reliable system installation

HD video scaler with HDMI output and input resolution control

Scales video signals up to 1080p/60Hz and 1920×1200

Set desired input resolution from 800×600 to 1920×1200 for a PC source

Incoming signals can be automatically scaled to the display’s native resolution

Manages EDID communications with a source connected to the HDVS-150-TX

Allows integrators to set or match a PC’s graphics resolution

HDCP compliance can be disengaged through the on-screen menu, control software, or a control system

Allows non-protected material from PCs to pass to non-compliant displays, streaming devices, and teleconference systems; protected content is not transmitted

Input switching (at the AT-HDVS-150-TX), image adjustments, resolution settings, and auto-set to display’s native resolution can be made from a third party control system

Seamless integration with larger, control system-based AV systems

Facilitates On/Off display control; Included software simplifies programming

Eliminates need for complex control system in small AV system

Industry standard IEEE 802.3af PoE supplied by the receiver over HDBaseT

No local AC outlet required at the AT-HDVS-150-TX switcher; saves time and integration costs

Rear panel USB port provides an easy means for device updates

Ensures long-term system return on investment

User guide and external universal power supply

Award-winning 10 year limited product warranty

Ensures long-term product reliability and performance in commercial and residential systems

Specify, purchase, and install with confidence

Consumption

Supply

H x W x D

The Atlona AT-PS-POE is a 48 VDC mid-span power injector designed to send remote power to HDBaseT products that operate on IEEE 802.03af Power over Ethernet. When placed within an HDBaseT transmission line, it allows two PoE-powered products to work toget

Atlona® Power Over Ethernet Mid-Span Power Supply

The Atlona AT-PS-POE is a 48 VDC mid-span power injector designed to send remote power to HDBaseT products that operate on IEEE 802.03af Power over Ethernet. When placed within an HDBaseT transmission line, it allows two PoE-powered products to work together. The power supply features two power switches to selectively send power up- or down-stream. Both power streams can operate simultaneously. With a bandwidth of 10.2 Gbps, the power supply supports 4K/UHD resolutions, multi-channel audio formats, and offers full 3-D pass-through and passes all HDCP signals. The PS-POE is housed in a compact enclosure and can be conveniently placed anywhere between the transmitter and receiver to provide power for PoE-powered devices.

Power Source Equipment (PSE) devices have an internal power supply or plug into external power supply and provide power to the HDBaseT cable. Powered Devices (PD) receive their power from the HDBaseT cable.

The PS-POE can be used with Atlona HDVS-200 and UHD-EX Series HDBaseT endpoint devices requiring remote PoE powering, especially when used with HDBaseT-equipped products that do not provide PoE, including displays, switchers, or third-party endpoints.

Power supply for remote powering for powered devices on HDBaseT transmission lines

Supplies 48 VDC to products using IEEE 802.03af Power over Ethernet

Industry standard powering scheme for HDBaseT products

Routes powers to up- and down-stream lines simultaneously

Saves cost by eliminating duplicate devices

Power switches for incoming and outgoing line

Power can be turned off in the direction of a non-PoE device

Sends power only in the required direction

10.2 Gbps bandwidth power supply supports 4K/UHD resolutions, multi-channel audio formats, HDCP 2.2, and offers full 3-D pass-through

Allows UHD-EX Series receivers to be used with PRO2HD Series or HD-CAT Series systems

Maintains ROI on legacy systems that need an additional signal extension or receiver upgrade/replacement

Easy insertion anywhere into HDBaseT transmission line including confined spaces

Keeps devices out-of-sight when placed in public spaces

User guide, 48 VDC power supply, and mounting brackets

Ensures long-term product reliability and performance in residential and commercial systems

The Atlona AT-PS-POE is a 48 VDC mid-span power injector designed to send remote power to HDBaseT products that operate on IEEE 802.03af Power over Ethernet. When placed within an HDBaseT transmission line, it allows two PoE-powered products to work together. The power supply features two power switches to selectively send power up- or down-stream.

The AT-UHD-EX-100CE-TX is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.

Atlona® 4K/UHD HDMI Over 100 M HDBaseT Transmitter

The Atlona AT-UHD-EX-100CE-TX is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass through, plus RS-232 and IR control. Designed to work with HDBaseT inputs on switchers and projectors, this extender transmits video signals up to 4K/UHD @ 60Hz with embedded multi-channel audio. Additionally, the transmitter extends Ethernet, RS-232, and 12 volt-based IR control commands. The AT-UHD-EX-100CE-TX is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This PSE (Power Sourcing Equipment) device is externally powered, includes a desktop power supply and provides Power over Ethernet for compatible receiving devices. The AT-UHD-EX-100CE-TX is certified by the HDBaseT Alliance.

This HDBaseT Class A transmitter is designed to support the growing number of displays and video projectors in the commercial market with HDBaseT inputs. Built-in Ethernet and bi-directional control signal extension eliminates the need for additional cabling from switcher to the display or remote input device. Installer-friendly features include: a rack-mountable form factor that allows four transmitters to share a single, 1U rack tray; power chaining to allow multiple sets to be powered from one power supply; and a front mounted USB port for easy firmware updates.

The AT-UHD-EX-100CE-TX is compatible with the AT-UHD-EX-100CE-RX receiver, as well as Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products. This transmitter is also ideal for extending AV and control to displays with HDBaseT inputs.

Compatible with Ultra High Definition sources and displays

Full support of 4K/UHD streaming services and playback devices

Adheres to latest specification for High-bandwidth Digital Content Protection

Allows protected content stream to pass between devices

Extends 4K HDR10 @ 24 Hz (4:2:0 chroma subsampling, 10-bit color)

Eliminates the need for remote power or power-injection devices

AV, Ethernet, power, and control over HDBaseT

Delivers 4K/UHD video, audio, 100Base-T Ethernet, power, and control through a single cable

Eliminates multiple cable runs between source, control system, router, and display

Transmits HDMI signals up to 330 ft (100m) @ 1080P and 328 ft (100m) @ 4K/UHD using CAT6a/7 cable

Uses easy to integrate category cable for low-cost, reliable system installation

Placement of ports on rear panel simplifies wire management

Saves installation time and eliminates clutter

Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, DTS:X™

Allows any multi-channel audio stream to be used within a professional audio system

Front panel USB port provides an easy means for kit upgrades

Ensures long term system return on investment

LED indicators provide power and HDBaseT link status information

Included power supply provides ample power for up to three Atlona HDBaseT extenders

Four Atlona HDBaseT extenders can be powered using the optional AT-PS-483125-C power supply

Reduces clutter from multiple power supplies in equipment racks

Low-profile, 1 inch (2.5cm) high quarter rack-width enclosure

Easy installation into racks and confined spaces behind displays

User guide, desktop power supply for transmitter, detachable power cable, IR emitter P/N AT-IR-CS-TX, mounting brackets

Firmware

HDBaseT

HDMI

TX-IR

RS-232

Power

H x W x D w/Ears

The AT-UHD-EX-100CE-TX-PD is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.

Atlona® 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter

The Atlona AT-UHD-EX-100CE-TX-PD is an HDBaseT transmitter for HDMI transmission up to 330 feet (100 meters) over category cable with Ethernet pass-through and RS-232 control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-100CE-TX-PD is HDCP 2.2 compliant and supports EDID communication. The transmitter features a quarter rack width metal enclosure for easy rack mounting with rear panel I/O ports for uncluttered wire management. This device is externally powered via Power over Ethernet, and is ideal for use with Atlona switchers with PoE-equipped HDBaseT inputs, including the AT-UHD-CLSO-612ED, AT-UHD-CLSO-840, and AT-UHD-SW-5000ED.

The AT-UHD-EX-100CE-TX-PD transmitter simplifies system design when powered by an Atlona switcher with HDBaseT inputs, reducing cost and complexity by eliminating the need for a power supply. It can also be paired with the AT-UHD-EX-100CE-RX-PSE receiver and AT-HDVS-200-RX scaling receiver, both delivering PoE. Installer-friendly features include a rack-mountable form factor that allows four transmitters to share a single 1U rack tray, and a front mounted USB port for easy firmware updates.

This transmitter is ideal for use in applications where:

HDBaseT transmitters need to be installed in a location where local AC power may not be available, such as a lectern or conference room table

4K/UHD signal extension and HDCP 2.2 compliance are necessary in the system design

The AT-UHD-EX-100CE-TX-PD is compatible with the AT-UHD-EX-100CE-RX-PSE receiver, and both products are available together as a kit. This transmitter is also ideal for Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products. This HDBaseT transmitter is also ideal for use with the AT-OME-RX11 receiver with audio de-embedding, as well as the AT-OME-RX21 scaling receiver with local HDMI input and audio de-embedding.

4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling

Remotely powered via PoE (Power over Ethernet)

Power for transmitter is supplied by receiver over HDBaseT

Delivers 4K/UHD video, embedded audio, 100Base-T Ethernet, power, and control through a single cable

Transmits HDMI signals up to 330 feet (100 meters) @ 1080p with CAT5e/6 or 4K/UHD using CAT6a/7 cable

Extends RS-232, CEC, and Ethernet control signals

Control signals travel over HDBaseT link to device for maximum control system flexibility

Simplifies integration of source, control system, and display

* The AT-UHD-EX-100CE-TX-PD does not include I/O ports for IR control signals extended over HDBaseT. If IR control over HDBaseT is required, please refer to the AT-UHD-EX-100CE-TX.

Supports PCM, Dolby Digital, Dolby Digital Plus™, Dolby TrueHD, Dolby Atmos®, DTS Digital Surround™, DTS-HD Master Audio™, and DTS:X™

Front panel USB port provides an easy means for device updates

Low-profile, 1 inch (25 mm) high quarter rack-width enclosure

Easy installation into racks and confined spaces

The AT-UHD-EX-70C-TX is part of the Atlona UHD-EX Series of HDBaseT extenders. See below for a complete listing of transmitters, receivers, and extender kits.

Atlona® 4K/UHD HDMI Over HDBaseT Transmitter

The Atlona AT-UHD-EX-70C-TX is an HDBaseT transmitter for HDMI transmission up to 230 feet (70 meters) over category cable with RS-232 and IR control. It transmits video signals up to 4K/UHD @ 60 Hz with 4:2:0 chroma subsampling, plus embedded multi-channel audio. The AT-UHD-EX-70C-TX is HDCP 2.2 compliant and supports EDID communication. This HDBaseT transmitter is externally powered by the included power supply, making it ideal for extending AV and control directly to a projector with an HDBaseT input.

The AT-UHD-EX-70C-TX provides a value-oriented integration solution for simple point-to-point signal extension to a display, or expanding the scope of an AV system design with remote input connectivity. It features a quarter rack width metal enclosure and includes surface mounting brackets for easy under-table, furniture, or on-wall installation.

The AT-UHD-EX-70C-TX is ideal for use in:

Extending AV and control to HDBaseT-equipped projectors and flat-panel displays

Integrating a remote source or HDMI connection point into an Atlona switcher with an HDBaseT input

Installations in which UHD-EX Series transmitters are to be used with third-party HDBaseT devices

The AT-UHD-EX-70C-TX is compatible with the AT-UHD-EX-70C-RX receiver, as well as Atlona switchers and matrix switchers with HDBaseT inputs. See below for a list of compatible products. This transmitter is also ideal for extending AV and control to displays with HDBaseT inputs.

Allows 4K/UHD transmission when used with a compatible HDBaseT-equipped display or HDBaseT receiver

Includes external power supply – ideal for point-to-point installations with an HDBaseT-equipped projector

IEEE 802.3af PoE Power Sourcing Equipment (PSE) – can supply power over HDBaseT to a remote receiver, such as the AT-UHD-EX-70C-RX*

* The transmitter and receiver can be purchased together as the AT-UHD-EX-70C-KIT.

Transmits AV and control up to 230 feet (70 meters) @ 1080p or 130 feet (40 meters) @ 4K/UHD using CAT6a/7 cable

Extends bidirectional RS-232 and IR control signals

User guide, surface mounting brackets, and external universal power supply

HDMI Inputs:

Screen Resolution:

The Atlona AT-VCC-RELAY-KIT is an accessory for the Atlona Velocity Control System that provides conversion between IP control commands and relay / sensor signals. This Velocity Control Converter is very compact and can be placed anywhere a device require

Atlona® IP to Relay / Sensor Signal Converter for Velocity Control System

Comprehensive Support of Third-Party AV Products

The Velocity Control System can be integrated with a wide range of sources, displays, DSPs, videoconferencing systems, and many other types of AV equipment. Please refer to this comprehensive database of supported third-party products for detailed information. Devices in the database are ready for immediate integration into a Velocity Control System with just a few mouse clicks. No driver download or installation is necessary.

Provides conversion between IP and relay / sensor control signals for the Velocity Control System

Compact form factor – inconspicuous and easily concealable

Easy to set up and configure from the Velocity Control Gateway

Also can be powered through USB from a nearby USB power source

Primary unit installs onto any surface via a convenient mounting dock – simple “click” locks device into place

Control port module includes four relay outputs and four sensor inputs

Relay outputs configurable to support common relay types – Single Pole Single Throw (SPST), Single Pole Double Throw (SPDT), and Double Pole Double Throw (DPDT)

Sensor inputs can be configured to support voltage or contact closure sensing

Push-in terminal blocks for relay and sensor connections

Control port module supports DIN rail installation

The Atlona AT-VCC-RELAY-KIT is an accessory for the Atlona Velocity Control System that provides conversion between IP control commands and relay / sensor signals. This Velocity Control Converter is very compact and can be placed anywhere a device requires control and is not IP-capable. The VCC-RELAY-KIT is remotely powered through Power over Ethernet (PoE), or locally from a USB power source. The primary unit installs onto any surface via a convenient mounting dock. A simple “click” locks it into place for a secure, reliable installation. The control port module supports DIN rail installation, and features four relay outputs plus four sensor inputs. The inputs and outputs are both configurable for various operating modes.

Network Connection

Relays

Relay Configurations

Sense Modes

H x W x D (AT-VCC-RELAY)

H x W x D (AT-VCC)

AT-VCC-RELAY Weight

AT-VCC Weight

The Atlona AT-VCC-RS232-KIT is an accessory for the Atlona Velocity Control System that provides conversion between IP and RS-232 control commands. This Velocity Control Converter is very compact and can be placed anywhere a device requires control and is

Atlona® IP to RS-232 Command Converter for Velocity Control System

Provides conversion between IP and RS-232 control commands for the Velocity Control System

Includes gender changer for male DB-9 connector

The Atlona AT-VCC-RS232-KIT is an accessory for the Atlona Velocity Control System that provides conversion between IP and RS-232 control commands. This Velocity Control Converter is very compact and can be placed anywhere a device requires control and is not IP-capable. The VCC-RS232-KIT is remotely powered through Power over Ethernet (PoE), or locally from a USB power source. The primary unit installs onto any surface via a convenient mounting dock. A simple “click” locks it into place for a secure, reliable installation. An RS-232 gender changer is included.

H x W x D (AT-VCC-RS232)

AT-VCC-RS232 Weight

The A-LC3 Local Source Input allows you to connect any analog audio source to the room speakers in an A-BUS zone.

Multi-Room Accessories

Atlona® 4K/UHD HDMI Over 100 M HDBaseT Transmitter

Atlona® 4K/UHD HDMI Over HDBaseT Transmitter

Atlona® 4K/UHD Remote Powered HDMI Over 100 M HDBaseT Transmitter

Atlona® Avance™ 4K/UHD HDMI Extender Kit

Atlona® Avance™ 4K/UHD HDMI Extender Kit with Control and Bidirectional Remote Power

Atlona® Avance™ 4K/UHD HDMI Extender Kit with Control and Remote Power

Atlona® Avance™ 4K/UHD HDMI Extender Kit with Ethernet, Control, and Bidirectional Remote Power

Atlona® Avance™ 4K/UHD HDMI Extender Kit with Remote Power

Atlona® HDBaseT Scaler

Atlona® HDMI to VGA/Component and Stereo Audio Format Converter

Atlona® IP to Relay / Sensor Signal Converter for Velocity Control System

Atlona® IP to RS-232 Command Converter for Velocity Control System

Atlona® Omega™ Wallplate HDBaseT Transmitter for HDMI and USB-C

Atlona® Omega™ Wallplate Transmitter for USB-C

Atlona® Power Over Ethernet Mid-Span Power Supply

Atlona® USB 2.0 Extender Kit Over Category Cable

Origin Acoustics® Acoustic Landscape™ 4.5" Satellite Speaker Kit

Russound® ComPoint Speaker

Russound® Local Source Input

CONTACT US

FOLLOW US

SOLUTIONS

INFO

ASSOCIATIONS