Power Management

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

AudioQuest Niagara 1200 Power Noise-Dissipation System for sale. Shop  your authorized AudioQuest dealer for the best power system deals.

AudioQuest Niagara 1200 Low-Z Power Noise-Dissipation System

Redefining The Science Of Power Conditioning: Low–Z Power Noise–Dissipation System

Niagara 1200 brings the benefits of highly optimized power management to far more music lovers and replaces the amazingly well–received Niagara 1000. The most obvious difference between the Niagaras 1000 and 1200, other than the 1200’s gorgeous textured bright finish, are the more universally useful shape and surprisingly substantial weight. The 1200 can now sit on a shelf like a component, with all the in and out cables in the back. It can be used ‘face’ down with the outlets in the air, fitting much better in the space between furniture and the wall. And, the 1200 is designed to stand on one end.

Designed by Garth Powell, the Niagara 1200 embodies the very same design philosophy and incorporates the same patented technology found in its larger siblings, the Niagara 5000 and Niagara 7000, but packs it into a smaller, sleeker enclosure—at a fraction of the price.

Much like the Niagara 5000 and 7000, the Niagara 1200 uses ultra–low resistance solid–core wiring optimized for low–noise directionality, capacitor forming technologies that vastly improve linearity and minimize distortion, and low–impedance AC inlet and outlet contacts with heavy silver plating over high–purity Beryllium Copper for superior noise dissipation. Similarly, Niagara 1200 features our non–sacrificial surge protection, patented Ground Noise–Dissipation technology, and over–voltage shutdown. The Niagara 1200’s non–sacrificial protection circuits ensure that your system is thoroughly protected from AC surges and spikes, and the Niagara 1200 protects itself—no damage, no down time. Set it and forget it.

The Niagara 1200 employs AudioQuest’s patented Ground–Noise Dissipation System and Linear Noise–Dissipation Technology and fits seven high–performance outlets into its sleek cabinet–friendly chassis. Input current maximum capacity is 15 amps RMS in the 1200.

7 AC outlets: 2 High-Current; 5 Linear Filtered

Patented Ground Noise-Dissipation System: All outlets: 2 banks of direction-controlled ground noise-dissipation

Direction-Controlled Ultra-Low-Resistance Solid-Core Wiring

Ultra-Linear AudioQuest AC RF Filtering Capacitors

Linear Noise-Dissipation Technology: More than 18 octaves of AC differential filtering with linear response, optimized for varying line and load impedance

Non-Sacrificial Surge Protection: Withstands multiple AC surges and spikes up to 6000V/3000A without sustaining damage

Over-Voltage Shutdown with Automatic Reset

Low-Z (low impedance) NRG Series Silver/Beryllium AC Power Inlets and Outlets

AudioQuest PowerQuest 2 AC Power Conditioner for sale. Shop  your authorized AudioQuest dealer for the best power conditioner deals.

AudioQuest PowerQuest 2 AC Power Conditioner

Directionally Optimized Concentric–Geometry AudioQuest Power Cord

Enhance your audio and video entertainment experience with PowerQuest. Our power filtration removes more noise and distortion than most common power conditioners, dramatically improving your system's performance. Unlike traditional surge protectors, non–sacrificial surge suppression prevents both high voltage and current from damaging your equipment, ensuring that your PowerQuest device won’t fail over time.

In addition, the PowerQuest PQ–2 features both a slim profile and a rugged floor–mounting stand that makes it ideal for mounting behind cabinets. Power cords plug straight down to the top–layer AC outlets, making installation trouble free. For those who prefer shelf mounting, the bottom stand can be easily removed. This allows easy access to all six power outlets. Sending clean power to your A/V system was never so simple or convenient.

140VAC: Will activate the main power circuit relay to open within less than 0.25 seconds; automatically resets once the incoming power is within a safe range.

Non–Sacrificial: Nothing to damage with repeated 6000V/3000A input surge tests, which is the maximum that can survive a building’s AC electrical panel.

Differential–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–1GHz. Filter linearized for dynamic (rising) line impedance with frequency from 0.05 Ohms (source) and 10 to 50 Ohm load, (system current dependent).

In addition to the Linear Filter, this outlet offers additional Noise–Dissipation technology to maximize TV performance.

1 x 4K/8K Video Optimized Linear Filter Outlet

AudioQuest PowerQuest 3 AC Power Conditioner for sale. Shop  your authorized AudioQuest dealer for the best power conditioner deals.

AudioQuest PowerQuest 3 AC Power Conditioner

In addition, the PowerQuest PQ–3 features both a slim profile and a rugged floor–mounting stand that makes it ideal for mounting behind cabinets. Power cords plug straight down to the top–layer AC outlets, making installation trouble free. For those who prefer shelf mounting, the bottom stand can be easily removed, permitting access to two rows of AC outlets (eight total). Sending clean power to your A/V system was never so simple or convenient.

Differential–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–1GHz; Common–Mode Noise Dissipation: In excess of 22dB reduction from 30kHz–100MHz. Both filters linearized for dynamic (rising) line impedance with frequency from 0.05 Ohms (source) and 10 to 50 Ohm load, (system current dependent).

In addition to the Ultra–Linear Filters, these outlets offer additional Noise–Dissipation technology to maximize TV performance.

2 x 4K/8K Video Optimized Ultra–Linear Filter Outlets

The Atlona AT-OMNI-IR-TX is an IR emitter cable for OmniStream AV encoders and decoders. The two-conductor cable features stripped ends designed for quick connection with captive screw connectors (not included). The OMNI-IR-TX is ideal for delivering IR c

Atlona® IR Emitter Cable for OmniStream Systems

IR emitter designed for Atlona OmniStreamTM AV encoders and decoders

Red status LED provides positive indication that emitter is operational and transmitting

Two-conductor cable with stripped ends; Signal and Ground conductors

Includes IR cover to prevent interference from other IR devices

The Atlona AT-OMNI-IR-TX is an IR emitter cable for OmniStream AV encoders and decoders. The two-conductor cable features stripped ends designed for quick connection with captive screw connectors (not included). The OMNI-IR-TX is ideal for delivering IR control to displays and AV source devices. An IR cover is included to avoid signal interference of the controlled device and possible interference to nearby IR devices. A red LED provides clear indication that the IR emitter is operational.

Replacement power supply for select Atlona extenders and switchers

Atlona® 48 Volt 0.83 Amp Power Supply

The AT-PS-48083-C is a 48 volt, 0.83 amp external power supply.

Optional power supply for OmniStreamTM networked AV encoders and decoders

It is an optional power supply for the following OmniStream™ networked AV encoders and decoders:

The AT-PS-48083-C is also a replacement power supply for the following products:

Certifications: FCC, RCM, cULus, CE, RoHS

The AT-PS-245-D4 is also a replacement power supply for select Omega Series products.

Atlona® 24 Volt 5.0 Amp Power Supply

The AT-PS-245-D4 is a 24 volt, 5.0 amp external power supply. It is an optional power supply for the AT-OME-ST31 and AT-OME-ST31A.

Provides superior spring tension and long-lasting, low-impedance AC power connections. Typical materials such as brass, or even high-purity copper aided by spring and wedge devices, simply cannot equal the unparalleled retention strength of high-mass bery

AudioQuest® 15 Amp NRG Edison AC Outlet

The NRG Edison is available in both 15 AMP and 20 AMP

Polished High-Tensions Surfaces With Hanging-Silver Plating

Significantly Greater Metal Mass For Optimum Current Delivery

Includes Duplex Outlet, Wall Plate and Hardware

Provides superior spring tension and long-lasting, low-impedance AC power connections. Typical materials such as brass, or even high-purity copper aided by spring and wedge devices, simply cannot equal the unparalleled retention strength of high-mass beryllium-copper.

Material:

Low-Z / Noise-Dissipation 3-Pole AC Power Cable. Solid Perfect-Surface Copper+ (PSC+) Perfect-Surface Copper (PSC) Conductors.

AudioQuest® 1.0 m Tornado Source 20 Amp Power Cable 

Solid Perfect-Surface Copper+ (PSC+) Perfect-Surface Copper (PSC) Conductors

Ground Noise-Dissipation Technology (US Patent # 9,373,439)

ZERO (No) Characteristic Impedance (50Hz – 1MHz)

Dielectric-Bias System with Radio Frequency Noise Trap

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

AudioQuest Tornado/Source AC power cable is not appropriate for use with AC power conditioners, power regenerators, AC isolation transformers, AC battery back-up devices, as well as any power amplifier, powered sub-woofer, powered loudspeaker, powered receiver, or integrated amplifier (whether tube, solid state or digital switching). These products will require greater RMS and transient current capacity. In extreme instances, they could suffer diminished performance and/or present an electrical danger by exceeding the AudioQuest Dragon/Source AC power cable’s maximum current capacity. For those applications, we highly recommend selecting the AudioQuest’s Dragon/High-Current AC power cable.

AudioQuest® 2.0 m Tornado Source 15 Amp Power Cable

AudioQuest® 2.0 m Tornado Source 20 Amp Power Cable

AudioQuest® 3.0 m Tornado Source 15 Amp Power Cable

AudioQuest® 3.0 m Tornado Source 20 Amp Power Cable 

Low-Z / Noise-Dissipation 3-Pole AC Power Cable. A carefully finessed combination of solid high-purity Long-Grain Copper (LGC) and high-purity Perfect-Surface Copper (PSC) conductors.

AudioQuest® 1.0 m Thunder High Current 15 Amp Power Cable 

Solid Perfect-Surface Copper (PSC) Long-Grain Copper (LGC) Conductors

72VDC Dielectric-Bias System (US Patent #7,126,055)

Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today’s high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the “masking effect.” Further, power amplifiers can require immense reserves of transient current for their power supplies to react to and then stabilize during dynamic audio passages. Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.

Power amplifiers present a real challenge for any AC power source, as the transient current requirements (though short in duration) can be many times that of the average (RMS) current consumption. Power amplifiers are also unique from all other components in that the current draw is dynamic, not constant, and it changes with volume and audio signal content. Though many AC power cords may feature low DC resistance to allow for some of this requirement, the characteristic impedance of the AC cable is equally responsible for assuring uncompromised performance. Many premium AC cords constrict or compress the audio transient as their characteristic impedance restricts the transient current.

AC Ground wires provide protection from current-wiring faults, but they also act as antennas. Thus, they are subject to induced radio-frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio/video circuits. AudioQuest’s patented Ground-Noise Dissipation greatly reduces this distortion, yielding unprecedented levels of noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit topology utilizes a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering. (US Patent # 9,373,439)

All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance.

Dielectric-Bias System With Radio Frequency Trap

All insulation between two or more conductors is also a dielectric whose properties will affect the integrity of the signal. When the dielectric is unbiased, dielectric-involvement (absorption and non-linear release of energy) causes different amounts of time delay (phase shift) for different frequencies and energy levels, which is a real problem for very time-sensitive multi-octave audio. The inclusion of an RF Trap (developed for AudioQuest’s Niagara Series of power products), ensures that radio frequency noise will not be induced into the signal conductors from the DBS field elements. (DBS, US Pat #s 7,126,055 & 7,872,195 B1)

High Purity Conductors - Long-Grain Copper (LGC) And Perfect-Surface Copper (PSC)

A carefully finessed combination of solid high-purity Long-Grain Copper (LGC) and high-purity Perfect-Surface Copper (PSC) conductors prevent strand interaction, a major source of ear fatiguing transient intermodulation distortion. LGC allows a smoother and clearer sound than standard OFHC (Oxygen-Free-High-Conductivity) copper. The astonishingly smooth and pure Perfect-Surface Copper further eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers.

Uncompressed High-Current Transfer - Thunder

With current capacity of 20 amps RMS @ 125VAC 50/60Hz (16 amps RMS @ 220-240VA 50/60Hz), Thunder/High-Current can withstand current transient peaks many times its continuous (average) RMS rating. This makes Thunder/High-Current ideally suited for a wide assortment of AC power conditioners, power regenerators, AC isolation transformers, and AC battery back-up devices, as well as any power amplifier, powered subwoofer, powered loudspeaker, powered receiver, or integrated amplifier.

AudioQuest® 1.0 m Thunder High Current 20 Amp Power Cable 

AudioQuest® 2.0 m Thunder High Current 15 Amp Power Cable 

AudioQuest® 2.0 m Thunder High Current 20 Amp Power Cable

AudioQuest® 3.0 m Thunder High Current 15 Amp Power Cable 

AudioQuest® 3.0 m Thunder High Current 20 Amp Power Cable

AudioQuest® 1.0 m Tornado High Current 15 Amp Power Cable 

High Purity Conductors - Perfect-Surface Copper (PSC) And Perfect-Surface Copper + (PSC+)

A carefully finessed combination of solid high-purity Perfect-Surface Copper (PSC) and extreme high-purity Perfect-Surface Copper + (PSC+) conductors to prevent strand interaction, a major source of ear fatiguing transient intermodulation distortion. The astonishingly smooth and pure Perfect-Surface Copper eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor.

Uncompressed High-Current Transfer - Tornado

With current capacity of 20 amps RMS @ 125VAC 50/60Hz (16 amps RMS @ 220-240VA 50/60Hz), Tornado/High-Current can withstand current transient peaks many times its continuous (average) RMS rating. This makes Tornado/High-Current ideally suited for a wide assortment of AC power conditioners, power regenerators, AC isolation transformers, and AC battery back-up devices, as well as any power amplifier, powered subwoofer, powered loudspeaker, powered receiver, or integrated amplifier.

Power Management

Atlona® 24 Volt 5.0 Amp Power Supply

Atlona® 48 Volt 0.83 Amp Power Supply

Atlona® IR Emitter Cable for OmniStream Systems

AudioQuest Niagara 1200 Low-Z Power Noise-Dissipation System

AudioQuest PowerQuest 2 AC Power Conditioner

AudioQuest PowerQuest 3 AC Power Conditioner

AudioQuest® 1.0 m Thunder High Current 15 Amp Power Cable

AudioQuest® 1.0 m Thunder High Current 20 Amp Power Cable

AudioQuest® 1.0 m Tornado High Current 15 Amp Power Cable

AudioQuest® 1.0 m Tornado High Current 20 Amp Power Cable

AudioQuest® 1.0 m Tornado Source15 Amp Power Cable

AudioQuest® 1.0 m Tornado Source 20 Amp Power Cable

AudioQuest® 2.0 m Thunder High Current 15 Amp Power Cable

AudioQuest® 2.0 m Thunder High Current 20 Amp Power Cable

AudioQuest® 2.0 m Tornado High Current 15 Amp Power Cable

AudioQuest® 2.0 m Tornado High Current 20 Amp Power Cable

AudioQuest® 2.0 m Tornado Source 15 Amp Power Cable

AudioQuest® 2.0 m Tornado Source 20 Amp Power Cable

AudioQuest® 3.0 m Thunder High Current 15 Amp Power Cable

AudioQuest® 3.0 m Thunder High Current 20 Amp Power Cable

AudioQuest® 3.0 m Tornado High Current 15 Amp Power Cable

AudioQuest® 3.0 m Tornado Source 15 Amp Power Cable

AudioQuest® 3.0 m Tornado Source 20 Amp Power Cable

AudioQuest® 15 Amp NRG Edison AC Outlet

CONTACT US

FOLLOW US

SOLUTIONS

INFO

ASSOCIATIONS